Turnstile FAQ

I-Q1: Yintoni ukunikezelwa kwamandla ebhodi engundoqo ye-turnstile?Yintoni unikezelo lwamandla lomlawuli?

A1:unikezelo lwamandla ebhodi ephambili ye-turnstile yi-24V, kunye nokunikezelwa kwamandla omlawuli yi-12V.

Qaphela xa udibanisa kwi-transformer , ngaphandle koko kulula ukutshisa umatshini.

20200310115200

Q2: indlela yokudibanisa i-terminal ye-485?Indlela yokuseta ifowuni yokucofa?

A2:ezimbini FR1200 ziya kudityaniswa ngaxeshanye.

I-dial switch ezimbini FR1200 kufuneka zibekwe ngokwahlukileyo, ezifana ne-1 kunye ne-3 okanye i-2 kunye ne-4. Oku kungenxa yokuba ukuba ifowuni yokucofa iyafana, iya kuthathwa njenge-fr1200 efanayo, okubangela ukuba i-turnstile ingangena kuphela enye. ulwalathiso.

I-Q3: indlela yokudibanisa umfundi we-Wiegand kunye nomlawuli?

A3:izibuko lodibaniso phakathi kweentloko ezimbini ezifundwayo zeWiegand kunye nesilawuli somfundi yile:

Umfundi1 kunye nomfundi3, umfundi2 okanye umfundi4

Oku kungenxa yokuba i-turnstile i-bi-directional kwaye sicinga ukuba ilawulwa ngamacango amabini ahlukeneyo.

Kwaye i-Reader1 kunye ne-reader2 yokulawula isango 1, i-reader3 kunye ne-reader4 isango lokulawula i-2, ngoko kufuneka udibanise ucingo ngale ndlela.

I-Q4: indlela yokudibanisa umlawuli (ngaphandle kwe-intanethi) kunye nebhodi ephambili ye-turnstile

A4:K1 ——HAYI(LOCK1)
GND ——COM
K2 ——HAYI(LOCK2)
GND ——COM

Q5:Xa izinto ze-optocoupler ziqhagamshelwe, ingaba imibala yeetheminali ihambelana njani enye kwenye

A5:SEN———emnyama
SEN+ ——bomvu
SEN3 ——mfusa
SEN2 ——blue
SEN1 ——luhlaza
SENC3 ——tyheli
SENC2 ——orenji
SENC1 ——brown

I-Q6: isilawuli siseti ngokuqhelekileyo sivulekile, sixhunyiwe kwi-NO port kunye ne-COM port.

A6:inxulumene noyilo lomatshini kunye nolwakhiwo.Xa kukho amandla, umlawuli akathumeli isignali kwibhodi engundoqo ye-turnstile ukuqinisekisa

I-turnstile ayibangeli utshintsho lwe-electromagnetic, ukuze kuqinisekiswe ukuba i-turnstile ayikwazi ukudlula.

Ukuba i-terminal ye-NC ixhunyiwe, umlawuli uya kuthumela umqondiso kwibhodi ephambili ye-turnstile ukukhuthaza i-turnstile .Ibhodi ephambili yesango le-roller ibangela ukutshintshwa kwe-electromagnetic, ukwenzela ukuba i-turnsitle idlule ngaphandle kokuswayipha ikhadi lonke ixesha.

I-Q7: cima ukuwisa intonga, kutheni isekwimeko yokulahla intonga emva kombane?

A7:I-turnstile yethu inomsebenzi wokuwisa intonga ngokuzenzekelayo kwimeko yokusilela kwamandla kunye nokulayisha intonga ye-manual kwimeko yombane.

Emva kokuba amandla abuyiselwe, linda ngaphezu kwe-6S kwaye uphakamise i-lever ye-brake ngesandla.

I-Q8: Amandla avuliwe, kodwa isalathisi asivuliwe?

A8:ingxaki kufuneka ibe namandla kunye ne-wiring.

Khangela ukuba intambo yokudibanisa kunye nocingo lwamandla ukusuka ekupheleni kolawulo oluphakathi ukuya kwibhodi yesibane zonakele, kwaye ingaba ibhloko ye-terminal ikhululekile, njl.

I-Q9: Emva kombane, i-brake ayikwazi ukusebenza ngesandla?

A9:Le ngxaki kufuneka ibe yingxaki yamalungu kunye nokulahla i-electromagnetic pole.

1. Khangela ukuba isihlalo esiphezulu sexesha le-lever sichasene netafile ejikelezayo, njengoko kuboniswe kuMzobo 6-1.

2. Khangela ukuba imagnethi yebar ewayo isebenza, vula isiciko esiphezulu se-chassis, kwaye uvule isigqubuthelo esingundoqo nge-hexagon screwdriver (Umfanekiso 6-2)

Jonga imeko yokusebenza kwe-electromagnetic, njengoko kubonisiwe kuMfanekiso 6-3.


Ixesha lokuposa: Mar-10-2020